Removing The Pickup Roller; Removing The Cassette Pickup Assembly Feed Roller/Separation Roller; Pickup Assembly - Canon 1130 Service Manual

3. Removing the Pickup Roller

1) Remove the cassette pickup assembly.
2) Remove the resin E-ring [1], and pull out the
pickup roller [2] together with its collar.
3) Remove the one at the rear in the same
way.
a. When mounting the
b. Do not detach the rub-
4. Removing the Cassette Pickup
Assembly Feed Roller/Separation
Roller
1) Remove the cassette 1 pickup assembly.
2) Remove the screw [1] and pickup cover
[2].
3) Remove the resin E-ring [3].
4) Pull off the feed roller [4] from the shaft
together with its belt.
COPYRIGHT © 2002 CANON INC.
pickup roller [1] to the
pickup assembly, be
sure that the round
marking [2] on its rub-
ber portion is to the
front of the copier. The
pickup roller is identi-
fied by color (front and
rear).
Use the gold-colored
pickup roller for the
front, and the silver-col-
ored pickup roller for
the rear.
ber portion of the
pickup roller from the
collar.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 7 PICK-UP / FEEDING SYSTEM
[2]
Figure 7-705
[2]
[1]
Figure 7-706
[4]
Figure 7-707
[1]
[2]
[1]
[3] [1] [2]
7-51