Canon 1130 Service Manual page 595

CHAPTER 13 TROUBLESHOOTING
10) Without pulling the transfer drum sheet,
lightly press along the middle of the
double-sided tape, along the trailing edge
of the sheet in sequence: [1], [2], and [3].
11) Move the thumbs in axial direction,
lightly pressing against the linking plate
so that the double-sided tape will be
firmly in contact.
12) Shift back the lever released in step 1).
13) Check the transfer drum sheet for
scratches, dents, and slack.
Be sure there is no
distortion or slack in the
middle of the transfer
drum. If distortion exists,
the transfer drum will
likely come into contact
with the photosensitive
drum, causing toner to fuse
to the photosensitive drum
and ultimately leading to
cleaning faults of the
photosensitive drum; if
slack exists, on the other
hand, such image faults as
transfer faults and color
displacement can occur.
14) Mount the transfer drum side scraper
removed when detaching the old transfer
drum sheet, and then mount the transfer
drum to the machine.
13-8 13-26b
COPYRIGHT © 2002 CANON INC. CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[2]
Figure 13-246a
Figure 13-246b
Direction of rotation
Correctly Attached Sheet
Figure 13-246c
Incorrectly Attached Sheet
Figure 13-246d
Incorrectly Attached Sheet
Figure 13-246e
[3]
[1]
Leading edge
of sheet
Trailing edge
of sheet