Canon 1130 Service Manual page 599

CHAPTER 13 TROUBLESHOOTING
Points to Note When Replacing
5
the Oil Coating Assembly
1. The oil coating unit is
2. If you have replaced the
13-30
COPYRIGHT © 2002 CANON INC.
adjusted and assembled
at the factory, and must
not be removed. Do not
touch the screws [1]
shown in the figure.
oil felt, be sure to
e x e c u t
COPIER>FUNCTION>
FIXING>PUMP-ON
in service mode to
impregnate it with
fixing oil.
Be sure to press the
Stop key in about 10
min.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
e
Figure 13-252 (rear)
Figure 13-253 (front)
[1]
[1]
[1]