4. Removing the Toner Supply Clutch
(The following uses the black hopper.)
1) Remove the hopper unit.
2) Remove the two screws [1], and detach
the hopper cover [2].
3) Remove the six screws [3], and detach
the hopper upper cover [4].
4) Remove the two screws [5], and detach
the reinforcing plate [6].
COPYRIGHT © 2002 CANON INC.
CANON CLC1100/1130/1150/1160/1180 REV.1 JAN. 2000 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 6 IMAGE FORMATION SYSTEM
[1]
Figure 6-659
[3]
[3]
Figure 6-660
[5]
Figure 6-661
[2]
[1]
[3]
[4]
[6]
6-75
[5]