Flywheel; Removing The Flywheel; Points To Note When Handling The Flywheel - Canon 1130 Service Manual

CHAPTER 9 EXTERNALS / AUXILIARY MECHANISMS
D. Flywheel

1. Removing the Flywheel

The copier's flywheel
weighs a total of 13 kg,
consisting of a 8-kg fly-
wheel and a 5-kg flywheel.
Take full care not to drop
it, and be sure to hold it on
its right and left as shown
when handling it.
1) Remove the rear cover.
2) Turn the flywheel counterclockwise so
that it is as shown in the figure.
Do NOT turn the flywheel
clockwise. Otherwise, it
will damage the cleaning
blade, causing cleaning
faults.
3) Remove the two screws [1], and detach
the flywheel 1 [2].
4) Remove the two screws [3], and detach
the flywheel 2 [4].
2. Points to Note When Handling the

Flywheel

The flywheel 1/2 has its face and its back.
Be sure to mount it so that the weight caution
label is in view (toward the rear cover).
9-26
COPYRIGHT © 2002 CANON INC.
[1]
[3]
CANON CLC1100/1130/1150/1160/1180 REV.2 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
Figure 9-720
[2]
Figure 9-721
[4]
figure 9-722