Canon 1130 Service Manual page 315

CHAPTER 7 PICK-UP / FEEDING SYSTEM
5) Remove the two screws [5], and detach
the separation roller support mount [6].
6) Remove the separation roller [7].
a. When mounting the
b. When mounting the
7-52
COPYRIGHT © 2002 CANON INC.
feed roller [1] to the
pickup assembly, be
sure that the gear [2] at-
tached to the feed roller
is at the front of the
copier.
separation roller [1] to
the pickup assembly, be
sure that the round
marking [2] is at the
front as shown.
CANON CLC1100/1130/1150/1160/1180 REV.1 FEB. 2002 PRINTED IN JAPAN (IMPRIME AU JAPON)
[5] [6]
Figure 7-708
Figure 7-709
[2]
[1]
Figure 7-710
[5]
[7]
[2]
[1]