Paper Transport - Canon NP-1015 Service Manual

III. PAPER TRANSPORT SYSTEM
A. PAPER PICK-UP ASSEMBLY
1. Removing the U Guide Plate
1) Remove the inner cover, right cover,
and rear cover, then open the manual
feed tray.
2) Disconnect the two connectors and the
Faston, unscrew the two screws, then
remove the power cord mount.
0 Connectors
@ Faston
@ Mounting screws
Figure 4-18
3) Remove the developing unit rail mount.
(two screws)
@ Mounting screws @ Developing unit
rail mount
Figure 4-19
4) Unscrew the screw and remove the two
pins.
/ _,
_"y
I'
3,
,"
@ Mounting screws @ Pins
Figure 4-20
5) Unscrew the screw and remove the rear
pin.
g z;unting screw @ U Guide plate
Figure 4-21
6) Remove the U guide, being careful of
the arm of the pick-up paper sensor.
@ Arm of the pick-up paper sensor
@ U Guide plate
Figure 4-22
COPYRI6HT 0 1988 CANON INC. CANOW HP-1015/1215S AN.0 OCT. 1988 PAINTEO IN JAPAN IlMPAlMf AU JAPON] 4-7