FDKN-H
12.2.6 Selection chart
Correct the cooling and heating capacity in accordance with the conditions as follows. The net cooling and heating capacity can be
obtained in the following way.
Net capacity = Capacity shown on specification × Correction factors as follows.
(1) Coefficient of cooling and heating capacity in relation to temperatures
Models FDKN208HEN-S1, 258HENS-1, FDKNP208HEN-S, 258HEN-S
Models FDKN308HEN-S, 308HES-S
488
Indoor air W.B. temperature (˚CW.B.)
Outdoor air W.B. temperature (˚CW.B.)
Indoor air W.B. temperature (˚CW.B.)
Outdoor air W.B. temperature (˚CW.B.)
ISO-T1 Standard condition
ISO-T1 Standard condition
ISO-T1 Standard condition