Mitsubishi Heavy Industries SRK25GZ-L1 Handbook page 248

SCM-C
(4) Operation control function by remote control switch
Remote control switch
S Operation section
FAN SPEED button
Each time the button is pushed, the ¡
indicator is switched over in turn.
TEMPERATURE button
This button sets the room temperature.
SET TIMER button
This button sets the ON timer and OFF
timer times.
S Indication section
TEMPERATURE Indicator
Indicates set temperature.
(Does not indicate temperature when
operation mode is on AUTO)
FAN SPEED Indicator
Indicates set air flow rate with • lamp
Unit indication section
246
• The above illustration shows all controls, but in
practice only the relevant parts are shown.
OPERATION MODE select button
Each time the button is pushed, the ¡
indicator is switched over in turn.
ON/OFF button
Press for starting operation, press again
for stopping.
AIRFLOW button
This button changes the flap mode. When
pressed, this button changes the mode in
the following order:
(AUTO)
no indication
(SWING STOPPED)
TIMER button
This button changes the selection of ON
timer/OFF timer operation and normal
operation.
RESET switch
Switch for resetting microcomputer.
OPERATION MODE Indicator
Indicates selected operation with • lamp
AIR FLOW Indicator
Shows selected flap mode.
TIMER Indicator
RUN lamp (green)
• Illuminates during operation.
TIMER lamp (yellow)
Illuminates during TIMER operation.
or
(SWING)