Mitsubishi Heavy Industries SRK25GZ-L1 Handbook page 133

(4) Flap control
Control the flap by AIRFLOW button on the wireless remote control.
(a) AUTO
The flap will be automatically set to the angle of air flow best to operation.
1) Starting time of operation
¡ SKM22, 25, 28, 32, 40 models
In case of cooling
s
and dry operation
Stops at the level position
for one minute.
¡ The flap operation as shown above will be repeated.
¡ SKM50 model
In case of cooling
s
and dry operation
¡ SRRM40 model
2) When not operating
The flap returns to the position of air flow directly below, when operation has stopped.
t
Sway operation
t
Stops at this position
for approximately 10
seconds.
: Moves quickly
Thick line
Thin line : Moves slowly
In case of cooling
s t
and dry operation
(Horizontal blowing)
In case of heating
s t
operation
Sway operation
¡ The flap operation as shown above will be repeated.
In case of heating
s t
operation
Stops at this position for
approximately 13 seconds.
: Moves quickly
Thick line
: Moves slowly
Thin line
In case of heating
s t
operation
(Slant forward blowing)
SCM-HG (4 room)
131