Mitsubishi Heavy Industries SRK25GZ-L1 Handbook page 578

FDR-H
(9) Installation of ornament panel
<Case of silent panel>
i) Accessory
ii) Installation procedures
(a) Remove the inner frame of panel
¡ How to remove the panel inner frame
1 Detach from pins (A) in the order of arrow 1 2.
2 Open slightly as the arrow 3 and move toward the arrow 4 and detach from pin (B).
Panel
inner frame
(b) Install the panel outer frame on the main unit.
¡ Steps of installation
1 Secure the panel tentatively with 2 of 4 panel set screws (panel accessory) as shown above.
2 When the panel is supported with a pair of set screws, slide it in the arrow direction.
[Note: Panel outer frame has the orientation.]
3 Lock the former 2 and remaining 2 set screws.
4 Install the panel inner frame in the reverse order of removal.
Main unit
1
Temporary
setting
<Case of canvas panel>
See installation manual which is equipped with canvas panel.
576
Panel
outer frame
Remove
1
Panel inner frame
3
Panel outer frame
3
Name Q'ty
Round head set
4 pcs. Securing the panel
screw (M5 × 35)
Pin (B) Panel outer Pin (A)
frame
4
Panel inner frame
Position
1
2
3