FDR-H
14.2.6 Selection chart
Correct the cooling and heating capacity in accordance with the conditions as follows. The net cooling and heating capacity can be
obtained in the following way.
Net capacity = Capacity shown on specification × Correction factors as follows.
(1) Coefficient of cooling and heating capacity in relation to temperatures
(a) Only case of ISO-T1 models (Only case of FDC308~508 type)
Indoor air W.B. temperature (˚CW.B.)
ISO-T1 Standard condition
ISO-T1 Standard condition
Outdoor air W.B. temperature (˚CW.B.)
(b) Only case of ISO-T1 models (Only case of FDC208, 258, FDC306~506 type)
Indoor air W.B. temperature (˚CW.B.)
ISO-T1 Standard condition
Outdoor air W.B. temperature (˚CW.B.)
557