9.2.6 Selection chart
Correct the cooling capacity in accordance with the conditions as follows. The net cooling capacity can be obtained in the following
way.
Net capacity = Capacity shown on specification × Correction factors as follows.
(1) Coefficient of cooling capacity in relation to temperatures
(a) Only case of ISO-T1 models (FDT208~508, FDTNP208, 258 type)
(b) Only case of ISO-T1 models (FDTNP308~508 type)
ISO-T1 Standard condition
Indoor air W.B. temperature(˚CW.B.)
ISO-T1 Standard condition
Outdoor air W.B. temperature (˚CW.B.)
Applicable range
FDT ( N ) -C
391