Table of Contents
Advertisement
5 Press the Attachment Name softkey and use the keypad dialog to enter
6 In the e- mail configuration dialog box, touch the To, From, Server, and
7 Finally, press the Press to Send Email softkey.
You can also configure the [Quick Action] key to e- mail setups, screen
images, or data. See
Recalling Setups, Masks, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Recall.
3 In the Recall Menu, press Recall:, then, turn the Entry knob to select
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
You can select from the same formats that are available when saving
files. Settings for the selected format are also the same. See
Setups, Screen Images, or Data"
the name of the attachment file that will be sent.
Subject fields and use the keypad dialog to enter the appropriate
strings.
You can also enter these strings by pressing the Config Email softkey and
the To, From, Server, and Subject softkeys in the Configure Email Menu.
You can specify multiple e- mail addresses by separating each address
by a semi- colon.
The Server name is the name of your mail server running the Simple
Mail Transfer Protocol (SMTP). If you do not know this name, ask your
Network Administrator.
"Configuring the [Quick Action] Key"
the type of file you want to recall:
Setup (*.scp) — See
•
Mask (*.msk) — See
•
Reference Waveform data (*.h5) — See
•
from a USB storage device"
Arbitrary Waveform data (*.csv) — See
•
page 321.
CAN Symbolic data (*.dbc) — See
•
Data"
on page 389.
Save/Email/Recall (Setups, Screens, Data)
on page 309.
"To recall setup files"
"To recall mask files"
"To recall reference waveform files
on page 320.
"To recall arbitrary waveforms"
"Loading and Displaying CAN Symbolic
"Saving
on page 347.
on page 320.
on page 320.
18
on
319
Advertisement
Table of Contents
