You can use a connected USB keyboard instead of using the Spell (and other) character
N O T E
editing softkeys.
Recalling Setups, Masks, or Reference Waveforms
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Recall.
3 In the Recall Menu, press Recall:, then, turn the Entry knob to select
You can also recall setups and mask files by loading them using the File
Explorer. See
You can also configure the [Quick Action] key to recall setups, masks, or
reference waveforms. See
page 253.
To recall setup files
Setup files can be recalled from one of 10 internal (\Agilent Flash)
locations or from an external USB storage device.
1 Press [Save/Recall] > Recall > Recall:; then, turn the Entry knob to select
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
When available, the Increment softkey can be used to enable or disable
automatically incremented file names. Auto increment adds a numeric
suffix to your file name and increments the number with each
successive save. It will truncate characters as necessary when the file
name length is at maximum and more digits are required for the
numeric portion of the file name.
the type of file you want to recall:
Setup (*.scp) — See
•
Mask (*.msk) — See
•
Reference Waveform data (*.h5) — See
•
from a USB storage device"
"File Explorer"
Setup (*.scp).
Save/Recall (Setups, Screens, Data)
"To recall setup files"
"To recall mask files"
"To recall reference waveform files
on page 228.
on page 241.
"Configuring the [Quick Action] Key"
on page 227.
on page 228.
on
17
227