Safety and Regulatory Information
General Safety Considerations
Product Installation, Use, and Storage
•
CAUTIONS
•
•
Product Power
•
CAUTIONS
•
•
•
Agilent Wireless Solutions
This Agilent digital receiver is designed for use in INSTALLATION
CATEGORY II and POLLUTION DEGREE 2, per IEC 1010 and 664
respectively.
Enclosure protection IP40 according to IEC 529.
Install the system according to the enclosure protection provided. This
system does not protect against the ingress of water. This instrument
protects against entry of solid foreign objects greater than, or equal to,
one millimeter.
The input power to the Agilent digital receiver should not exceed
–15 dBm. Power levels greater than +10 dBm will damage the
instrument.
For continued protection against fire hazard, replace the line fuse
(cigarette lighter/2 amp 32 V FB fuse) only with the same type of rating
(type nA/nV). The use of other fuses or materials is prohibited.
If you use external power, install the instrument so the detachable power
cord is readily identifiable and is easily reached by the operator. The
detachable power cord is the instrument disconnecting device. It
disconnects the mains circuit from the mains supply before other parts of
the instrument.
If you do not use external power, position the product so you can easily
operate the disconnecting device.
181