To Save Arbitrary Waveforms; To Navigate Storage Locations; To Enter File Names - Agilent Technologies InfiniiVision 4000 X-Series User Manual

To save arbitrary waveforms

Arbitrary waveform files can be saved to one of four internal (\Agilent
Flash) locations or to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
See Also
•

To navigate storage locations

When saving or recalling files, the softkey in the second position of the
Save Menu or Recall Menu, along with the Entry knob, are used to
navigate to storage locations. The storage locations can be internal
oscilloscope storage locations (for setup files or mask files) or they can be
external storage locations on a connected USB storage device.
The softkey in the second position can have these labels:
• Press to go — when you can push the Entry knob to navigate to a new
• Location — when you have navigated to the current folder location (and
• Save to — when you can save to the selected location.
• Load from — when you can recall from the selected file.
When saving files:
• The proposed file name is shown in the Save to file = line above the
• To overwrite an existing file, browse to that file and select it. To create

To enter file names

To create new file names when saving files to a USB storage device:
Agilent InfiniiVision 4000 X-Series Oscilloscopes User's Guide
Arbitrary Waveform data (*.csv).
navigate to the save location. See
page 315.
A message indicating whether the save was successful is displayed.
"To edit arbitrary waveforms"
folder or storage location.
are not saving files).
softkeys.
a new file name, see
Save/Email/Recall (Setups, Screens, Data)
"To navigate storage locations"
on page 289
"To enter file names" on page 315.
18
on
315