Save And Recall Controls - Agilent Technologies 3000 Series User's And Service Manual

Save and Recall Controls

Figure 2-27 shows the location of the Save/Recall button on the front panel.
Figure 2-27
Save/Recall Button Location
Pressing the Save/Recall button produces the associated menu as follows:
Table 2-16 Save/Recall Menu Buttons
Menu
Save/Recall
Default Setup
Waveform
Setup
Load
Save
Settings Comments
Waveforms Save or recall waveforms
Setups Save or recall an oscilloscope setup
Loads the factory default setup
No.1 through No. 10 Sets the storage location of the waveform
No.1 through No. 10 Sets the storage location of the setup
Recall waveforms or setups
Save waveforms or setups
2-45