To Save Reference Waveform Files To A Usb Storage Device; To Save Masks - Agilent Technologies InfiniiVision 2000 X-Series User Manual

To save reference waveform files to a USB storage device

1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press the Save softkey.
3 In the Save Menu, press the Format softkey and turn the Entry knob to
4 Press the Source softkey and turn the Entry knob to select the source
5 Press the softkey in the second position and use the Entry knob to
6 Finally, press the Press to Save softkey.

To save masks

Mask files can be saved to one of four internal (\Agilent Flash) locations
or to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
2 Press the softkey in the second position and use the Entry knob to
3 Finally, press the Press to Save softkey.
Mask files have the extension MSK.
Masks are also saved as part of setup files. See
N O T E
See Also
•
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
select Reference Waveform data (*.h5) .
waveform.
navigate to the save location. See
page 226.
A message indicating whether the save was successful is displayed.
Mask (*.msk).
navigate to the save location. See
page 226.
A message indicating whether the save was successful is displayed.
Chapter 14, "Mask Testing," starting on page 189
Save/Recall (Setups, Screens, Data)
"To navigate storage locations"
"To navigate storage locations"
"To save setup files"
17
on
on
on page 219.
225