One reference waveform can be displayed at a time.
See Also
•
To scale and position reference waveforms
1 Make sure the multiplexed scale and position knobs to the right of the
2 Turn the upper multiplexed knob to adjust the reference waveform
3 Turn the lower multiplexed knob to adjust the reference waveform
To adjust reference waveform skew
Once reference waveforms are displayed, you can adjust their skew.
Agilent InfiniiVision 2000 X-Series Oscilloscopes User's Guide
"To display reference waveform information"
[Ref] key are selected for the reference waveform.
If the arrow to the left of the [Ref] key is not illuminated, press the key.
scale.
position.
Reference Waveforms
on page 80
5
79