Step 11. Other Postinstallation Tasks - Nortel Contact Center Multimedia Installation And Maintenance Manual

Upgrading from SWCP Release 4.0

Step 11. Other postinstallation tasks

You can perform the following postinstallation tasks.
Changing your Event Viewer settings
Based on the size of your contact center, you can change the size of your
Windows Application Log that hold events produced by the Contact Center
Multimedia Server application. For more information, see "Create Log reports"
on page 1247.
Configuring SNMP (optional)
If you are using the Windows Simple Network Management Protocol (SNMP)
service to forward traps, you must perform these tasks, if you have not already
done so:
Configure the Windows SNMP service on the server.
Select the types of events you want to forward to the Network Management
System (NMS).
Configure the NMS.
For more information, see "Configure the Windows SNMP service on the
server" on page 1253.
Configuring Security settings
Ensure that your security settings meet the requirements for your contact center.
For more information about configuring your security settings for Contact
Center Multimedia Server, see "Use the Windows Server 2003 Security
Configuration Wizard" on page 1271.
What is next?
Ensure your clients meet the requirements for your client applications. For more
information, see Step 12. "Check the requirements for each client" on page 358.
356 Contact Center Multimedia/Outbound
Standard 7.16