Patch Delete - 3Com S7906E Command Reference Manual

View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file
used.
slave: Specifies the standby main board.
slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the
device model.
Description
Use the patch deactive command to stop running the specified patch and all the ACTIVE patches
before the specified patch number, and the system will run at the original software version.
All the ACTIVE patches (including the specified patch) turn to DEACTIVE state.
This command is not applicable to the patches in the RUNNING state.
If you execute this command without specifying slave or slot-number, the command deactivates the
specified patches on the active main board.
Examples
# Stop running patch 3 and all the ACTIVE patches after patch 3 on board 5.
<Sysname> system-view
[Sysname] patch deactive 3 slot 5

patch delete

Syntax
patch delete patch-number [ slave | slot slot-number ]
View
System view
Default Level
3: Manage level
Parameters
patch-number: Sequence number of a patch. The valid values of this argument depend on the patch file
used.
slave: Specifies the standby main board.
slot slot-number: Specifies a board by its slot number. The value range of this argument varies with the
device model.
1-3