Ipv6 Address - 3Com Switch 4500 Family Manual

Table 1-12 Description on the fields of the display udp ipv6 statistics command
Total
checksum error
shorter than header
data length larger than packet
unicast(no socket on port)
broadcast/multicast(no socket on port)
not delivered, input socket full
input packet missing pcb cache

ipv6 address

Syntax
ipv6 address { ipv6-address prefix-length | ipv6-address/prefix-length }
undo ipv6 address [ ipv6-address prefix-length | ipv6-address/prefix-length ]
View
Interface view
Parameters
ipv6-address: IPv6 address.
prefix-length: Prefix length of an IPv6 address, in the range of 1 to 128.
Description
Use the ipv6 address command to configure a site-local address or global unicast address manually
for an interface.
Use the undo ipv6 address command to remove the manually configured interface address.
By default, no site-local address or global unicast address is configured for an interface.
Note that:
A 3com switch 4500 can have IPv6 unicast addresses configured on only one VLAN interface. The
total number of IPv6 global unicast addresses and site-local addresses configured on an interface
can be up to four.
You will remove all IPv6 addresses except the automatically configured link-local address if you
carry out the undo ipv6 address command without any parameter specified.
Examples
# Set the aggregatable global IPv6 unicast address of VLAN-interface 1 to 2001::1 with prefix length 64.
Field Description
Total number of received/sent packets
Total number of packets with an invalid checksum
Total number of IPv6 UDP packets whose total length is
less than that specified by the packet header
Total number of packets whose data length exceeds that
specified by the packet header
Total number of received unicast packets without any
socket on a port
Total number of received broadcast/multicast packets
without any socket on a port
Number of packets not handled because of the receiving
buffer being full
Number of packets that do not match any entry in the PCB
cache
1-17