Common Multicast Configuration Commands; Display Mac-Address Multicast Static - 3Com 5500-EI PWR Reference Manual

1

Common Multicast Configuration Commands

Common Multicast Configuration Commands

display mac-address multicast static

Syntax
display mac-address multicast static [ [ mac-address ] vlan vlan-id ] [ count ]
View
Any view
Parameters
mac-address: Displays the static multicast MAC entry information for the specified MAC address.
Without this argument provided, this command displays the information of all static multicast MAC
entries in the specified VLAN.
vlan vlan-id: Displays the static multicast MAC entry information in the specified VLAN. Without a VLAN
specified, this command displays the static multicast MAC entry information in all VLANs.
count: Displays the number of static multicast MAC entries.
Description
Use the display mac-address multicast static command to display the information about the
multicast MAC address entry or entries manually configured on the switch.
Related commands: mac-address multicast interface, mac-address multicast vlan.
Examples
# Display the information of all static multicast MAC entries in VLAN 1.
<Sysname> display mac-address multicast static vlan 1
MAC ADDR
0100-0001-0001
--- 1 static mac address(es) found
Table 1-1 display mac-address multicast static command output description
MAC ADDR
VLAN ID
VLAN ID STATE
1 Config static
---
Field
PORT INDEX
Ethernet1/0/1
Ethernet1/0/2
Ethernet1/0/3
Ethernet1/0/4
MAC address
The VLAN in which the MAC address is
manually added
1-1
AGING TIME(s)
NOAGED
Description