Aal5 Control Statistics; Display Aal5-Layer Control Statistics - 3Com CoreBuilder 7000 Management Manual

C 8: V
244
HAPTER IEWING
AAL5 Control
Statistics
Display AAL5-Layer
Control Statistics
S
TATISTICS
The following commands allow you to display AAL5 control statistics.

Display AAL5-Layer Control Statistics

Display ATM-Layer VPI/VCI Statistics
For information about AAL5-layer control, see "Signaling AAL" on page
114 in the Operations Guide.
Displays the control frames (AAL5 layer) statistics, including protocol
information, for a specified port.
Command Actions
Enter the menu sequence: (4) STS: Statistics
Enter a parameter at the prompt
Parameter
Port ID
Direct access sequence:
Command Result
System action taken:
System message display:
Example
Enter:
4 5 1 3.1
The AAL5-Layer statistics for port <3.1> are displayed.
(5) CTL: Control frames
(1) GET: Get Control frames
Format or Range
slot.port (0.0 for all ports)
4 5 1 [parameters]
AAL5-layer control frame statistics for the specified
port are displayed.
Information is displayed as shown in the example
below.