Output Specifications - Omron CP1H CPU Operation Manual

Specifications
Output When the
terminal instructions to
block the right are
not executed
Word Bit Normal
outputs
CIO 00 Normal output 8 ---
101
01 Normal output 9 ---
02 Normal output
10
03 Normal output
11
04 Normal output
12
05 Normal output
13
06 Normal output
14
07 Normal output
15

Output Specifications

Relay Outputs
58
When a pulse output instruction
(SPED, ACC, PLS2, or ORG) is
executed
Fixed duty ratio pulse output
CW/CCW Pulse plus
direction
---
---
--- ---
--- ---
--- ---
--- ---
--- ---
--- ---
Item
Max. switching capacity
Min. switching capacity
Service life Electrical
of relay
Mechanical
ON delay
OFF delay
Circuit configuration
Under the worst conditions, the service life of output contacts is as shown
above. The service life of relays is as shown in the following diagram as a
guideline.
When the origin search
function is set to be used in
the PLC Setup, and an
origin search is executed by
the ORG instruction
+ When the origin search
function is used
---
---
Origin search 0 (Error counter
reset output)
Origin search 1 (Error counter
reset output)
Origin search 2 (Error counter
reset output)
Origin search 3 (Error counter
reset output)
---
---
2 A, 250 VAC (cosφ = 1)
2 A, 24 VDC (4 A/common)
10 mA, 5 VDC
Resistive 100,000 operations (24 VDC)
load
Inductive 48,000 operations (250 VAC, coφs = 0.4)
load
20,000,000 operations
15 ms max.
15 ms max.
Output LED
Internal
circuits
Section 2-2
When the PWM
instruction is
executed
Variable duty ratio
pulse output
PWM output
PWM output 0
PWM output 1
---
---
---
---
---
---
Specification
OUT
OUT
Maximum
COM
250 VAC: 2 A
24 VDC: 2 A