Omron CP1H CPU Operation Manual page 274

Pulse Outputs
Stopping a Pulse Output
Operation Example
application
Stop pulse Immediate
output stop
Stop pulse Immediate
output stop
Stop pulse Decelerate
output to a stop
smoothly
240
Frequency changes
Pulse frequency
Present frequency
Execution of INI(880)
Pulse frequency
Present frequency
Execution of SPED(885)
Pulse frequency
Present frequency
Target frequency = 0
Execution of ACC(888)
Description
Stops the pulse out-
put immediately.
Time
Stops the pulse out-
put immediately.
Time
Decelerates the
pulse output to a
Acceleration/
stop.
deceleration rate
(Rate set at the
Note If ACC(888)
start of the
started the
operation.)
operation, the
original
Time
acceleration/
deceleration
rate will
remain in
effect.
If SPED(885)
started the
operation, the
acceleration/
deceleration
rate will be
invalid and
the pulse out-
put will stop
immediately.
Section 5-3
Procedure
Instruction Settings
SPED(885) •Port
or ACC(888)
•Stop
(Continu-
pulse out-
ous)
put
↓
INI(880)
SPED(885) •Port
or ACC(888)
•Continu-
(Continu-
ous
ous)
•Target fre-
↓
quency=0
SPED(885)
(Continu-
ous)
•Port
SPED(885)
or ACC(888)
•Continu-
(Continu-
ous
ous)
•Target fre-
↓
quency=0
ACC(888)
(Continu-
ous)