Omron CP1H CPU Operation Manual page 103

Specifications
!Caution Do not connect a load to an output terminal or apply a voltage in excess of the
Pulse Outputs (CIO 100.04 to CIO 100.07)
Note
PWM Outputs (CIO 101.00 and CIO 101.01)
(2) If the ambient temperature is maintained below 50°C, up to 0.9 A/com-
mon can be used.
Common terminal
current (A)
0.9
0.6
0
0
Ambient temperature (°C)
maximum switching capacity.
Item
Max. switching capacity
Min. switching capacity
Max. output frequency
Output waveform
(1) The load for the above values is assumed to be the resistance load, and
does not take into account the impedance for the connecting cable to the
load.
(2) Due to distortions in pulse waveforms resulting from connecting cable im-
pedance, the pulse widths in actual operation may be smaller than the
values shown above.
Item
Max. switching capacity
Max. output frequency
PWM output accuracy
Output waveform
50 55
Specification
30 mA/4.75 to 26.4 VDC
7 mA/4.75 to 26.4 VDC
100 kHz
OFF
90%
10%
ON
4 µs min.
Specification
30 mA/4.75 to 26.4 VDC
1 kHz
For ON duty +5%, −0%/1 kHz output.
OFF
ON
t
ON
T
Section 2-2
2 µs min.
t
ON
× 100%
ON duty =
T
69