Wiring Cp1H Cpu Units - Omron CP1H CPU Operation Manual

Wiring CP1H CPU Units

DIN Track
3-4

Wiring CP1H CPU Units

Note
116
Mount the DIN Track in the control panel with screws in at least three places.
• DIN Track: PFP-50N (50 cm), PFP-100N (100 cm), or PFP-100N2
(100 cm)
Secure the DIN Track to the control panel using M4 screws separated by
210 mm (6 holes). The tightening torque is 1.2 N·m.
PFP-100N2
28.25 × 4.5 oblong holes
4.5
25
15 25
10
1000
PFP-100N/50N
4.5
15 25 25
10
1000 (500)
(See note.)
(1) Do not remove the protective label from the top of the Unit until wiring has
been completed. This label prevents wire strands and other foreign mat-
ter from entering the Unit during wiring procedures.
(2) Remove the label after the completion of wiring to ensure proper heat dis-
sipation.
30 ±0.3
27 24
25
25 15
10
7.3 ±0.15
35 ±0.3
25 25 15 (5)
10
(See note.)
Note: PFP-50N dimensions are given in parentheses.
Section 3-4
16
29.2
1 1.5
27 ±0.15
1