Omron CP1H CPU Operation Manual page 405

Memory Cassette Functions
Automatic Transfer
from the Memory
Cassette at Startup
Note
With just a simple DIP switch setting, data stored in advance in the Memory
Cassette can be automatically read when the power is turned ON, and written
to the corresponding areas in the CPU Unit.
Mount a Memory Card and set DIP switch pin SW2 to ON, and then turn the
power OFF and back ON.
All valid data in the Memory Card will be automatically transferred to the CPU
Unit.
When this function is executed, at least the user program must be stored on
the Memory Cassette.
CP1H CPU Unit
Data in CPU
Unit
DIP switch SW2 set to ON.
Data automatically transferred from Memory
Cassette to CPU Unit.
Programs, parameters, DM initial values,
comment memory, etc. (Can be specified
individually.)
This function can be used to copy data to another CPU Unit without using the
CX-Programmer.
CP1H CPU Unit
Data in CPU
Unit
Programs, parameters, DM initial
values, comment memory, etc.
User programs can be overwritten to upgrade equipment versions without
using the CX-Programmer.
Power turned ON.
CP1W-ME05M
Memory Cassette
Section 6-5
Another CPU Unit
Can be automatically
transferred at startup.
371