Pulse Output 0 Settings - Omron SYSMAC CP Series User Manual

7 PLC Setup
Name
7 IN8: CIO 0.08
(N20/30/40/60 CPU Unit only)
8 IN9: CIO 0.09
(N20/30/40/60 CPU Unit only)
7-2-8

Pulse Output 0 Settings

The settings are applicable to the N/S
Base Settings
Name
1 Undefined Origin (operation for limit signal
turning ON)
2 Limit Input Signal Operation
3 Limit Input Signal
4 Search/Return Initial Speed
Origin Search Settings
Name
1 Use define origin operation
1-1 Search Direction
1-2 Detection Method
1-3 Search Operation
1-4 Operation Mode
1-5 Origin Input Signal
1-6 Proximity Input Signal
1-7 Search High Speed
1-8 Search Proximity Speed
7-18
Default Possible settings
Normal Normal
Interrupt
Quick
Normal Normal
Interrupt
Quick
-type CPU Units with transistor outputs.
Default Possible settings
Hold Hold
Undefined
Search Only Search Only
Always
NC NC
NO
0 pps 0 pps
:
100,000 pps
Default Possible settings
Do not use. Do not use.
Use.
CW CW
CCW
Method 0 Method 0
Method 1
Method 2
Inverse 1 Inverse 1
Inverse 2
Mode 0 Mode 0
Mode 1
Mode 2
NC NC
NO
NC NC
NO
0 pps (disabled) 1 pps
:
100,000 pps
0 pps (disabled) 1 pps
:
100,000 pps
When setting is read by
CPU Unit
When power is turned ON
When power is turned ON
When setting is read by
CPU Unit
At start of operation
When power is turned ON
At start of operation
At start of operation
When setting is read by
CPU Unit
When power is turned ON
At start of operation
At start of operation
At start of operation
At start of operation
At start of operation
At start of operation
At start of operation
At start of operation
CP2E CPU Unit Software User's Manual(W614)