Specifications
2-2-6
CP-series Expansion I/O Unit I/O Specifications
Input Specifications (CP1W-40EDR/40EDT/40EDT1/20EDR1/20EDT/20EDT1/8ED and
CPM1A-40EDR/40EDT/20EDR1/20EDT/20EDT1/8ED)
Note
Output Specifications
Relay Outputs (CP1W-40EDR/32ER/20EDR1/16ER/8ER and CPM1A-40EDR/20EDR1/16ER/8ER)
70
Item
Input voltage
Input impedance
Input current
ON voltage
OFF voltage
ON delay
OFF delay
Circuit configuration
(1) This setting can be changed to 0, 0.5, 1/2, 4, 8, 16, or 32 ms in the PLC
Setup. For the CPM1A-40EDR/EDT/EDT1, it is fixed at 16 ms.
(2) Do not apply voltage in excess of the rated voltage to the input terminal
Item
Max. switching capacity
Min. switching capacity
Service life
Electrical
of relay
(See note.)
Mechanical
ON delay
OFF delay
Circuit configuration
Specification
+10%
24 VDC
/
−15%
4.7 kΩ
5 mA typical
14.4 VDC min.
5.0 VDC max.
0 to 32 ms max. Default: 8 ms (See note 1.)
0 to 32 ms max. Default: 8 ms (See note 1.)
IN
Input LED
4.7 kΩ
IN
CO M
2 A, 250 VAC (cosφ = 1),
2 A, 24 VDC (4 A/common)
5 VDC, 10 mA
Resistive
150,000 operations (24 VDC)
load
Inductive
100,000 operations (240 VAC, cosφ = 0.4)
load
20,000,000 operations
15 ms max.
15 ms max.
Output LED
Internal
circuits
Section 2-2
Internal
circuits
Specification
OUT
OUT
Maximum
COM
250 VAC: 2 A
24 VDC: 2 A