Omron CP1H CPU Operation Manual page 581

Web Browser Setup and Display
9-10-5 IP Address Table
Set the IP address table that defines the relationship between FINS node
addresses and IP addresses. With FINS/UDP, this is enabled only when the
IP address table method is set to the IP address conversion method.
Item
FINS Node Address Set the node address for the remote device.
IP Address Set the related IP address for the remote device. None
The functions of the buttons are as follows.
Button
Transfer Transfer the entered values from the personal computer to the
Ethernet Option Board. (The new settings are invalid until the
Ethernet Option Board has been reset.)
Cancel Cancel the entered values.
Restart Restart the Ethernet Option Board to enable the new settings after
transfer.
The Restart button is invalid to the PLC.
Show Show the FINS node address and IP address of the selected No.
Delete Delete the IP address table of the selected No.
Section 9-10
Contents
Function
Default
None
547