Brake Light Switch; Diode - Honda Shadow TA200 2001 Manual

BRAKE LIGHT SWITCH
FRONT
Disconnect the front brake l i ght switch connectors.
There should be continuity with the brake l e ver applied, and
there should be no continuity with the brake l e ver is released.
REAR
Disconnect the rear brake light switch 2P connector and check
for continuity between the terminals.
There should be continuity with the brake pedal applied, and
there should be no continuity with the brake pedal is released.
DIODE
Remove the left front side cover (page 2-3).
Remove the diodes.
LIGHTS/METER/SWITCHES
BRAKE LIGHT SWITCH
BRAKE LIGHT SWITCH CONNECTOR
DIODES
\
NOTE:
Refer to page 18-2 (troubleshooting).
Check for continuity between the diode terminals.
When there i s continuity, a small resistance value
will
regis-
ter.
If there i s continuity i n one direction, the diode is normal.
O>-+----t l .. , 1 11-+-o
18-11