Honda Shadow TA200 2001 Manual page 175

FRONT WHEEL/SUSPENSION/STEERING
Install the upper holders on the handlebar with lheir punch
marks forward.
lnslall lhe upper holders and lemporarily lighlen lhe socket
bolts.
Align the punch mark on the handlebar with the top of the
lower holders.
Tighten the front bolts first, then tighten the rear bolls.
lnslall lhe holder caps.
HOLDER CAPS
I
Apply Honda Bond A or i t s equivalent to the i n side of the grip
and to the clean surfaces of the left handlebar and throttle
grip.
Wait
3 - 5
minutes and i n stall the grip.
Rolale lhe grip for even applicalion of lhe adhesive.
NOTE:
Allow the adhesive to dry tor an hour before using.
Apply grease to the sliding surface of the throttle pipe.
Install the lhrollle pipe on lhe righl handlebar.
- !ijjjjj;,.
THROTTLE PIPE
12-6