Honda Shadow TA200 2001 Manual page 144

Remove the bolt, gearshift drum stopper plate and, knock pin.
Remove the bolt, gearshift stopper arm, washer, return spring.
INSPECTION
Inspect the return spring for damage and i n spect the gearshaft
spindle tar wear or damage.
INSTALLATION
Install the return spring, washer, gearshift stopper arm and
tighten the boll to specified torque.
TORQUE: 12 N-m (1.2 kgf.m, 9 lbf·fl)
CLUTCH/GEARSHIFT LINKAGE
9-13