Table of Contents
Advertisement
MAINTENANCE
STARTING ENRICHMENT (SE) VALVE
The starting enrichment system uses a fuel enriching circuit
controlled by an starting enrichment (SE) valve. The SE valve
opens the enriching circuit vir a cable when the SE valve knob
is pulled.
Check for smooth operation ol the choke knob.
Check for any deterioration or damage to the choke cable.
If the operation is not smooth, lubricate the choke cable and
choke knob sliding surface with a commercially available cable
lubricant or a light weight oil.
f
ADJUSTER
RUBBER COVER
I
NOTE:
If the motorcycle is used i n wet or dusty areas, more frequent
inspections are required.
CAUTION:
Be careful not lo allow the foreign material into the air
cleaner
housing.
Remove the side cover (page 2-2).
Remove the screws and air cleaner housing cover.
Remove the air cleaner element.
Replace the element accordance with the maintenance sched-
ule (page 3-3).
Also, clean the element using compressed air from the
carburetor side, or replace i t i f necessary.
Install the removed parts i n the reverse order of removal.
3-6
ELEMENT
Advertisement
Chapters
Table of Contents
