Honda Shadow TA200 2001 Manual page 203

REMOVAL
Support the motorcycle securely using a hoist or equivalent.
Loosen the drive chain adjusting nuts and l o ck nuts (page 3-
15).
Loosen the rear axle nut.
REAR WHEEL/SUSPENSION
AXLE NUT
Push the rear wheel forward.
Derail the drive chain.
Remove the axle nut.
Remove the rear axle from the left side.
Remove the rear wheel.
\'
INSPECTION
Axle
Place the axle in V-blocks and measure the runout.
Actual runout is 1/2 the total i n dicator reading.
SERVICE LIMIT: 0.20 mm (0.008 in)
Wheel rim runout
Check the rim runout by placing the wheel i n a turning stand.
Spin the wheel slowly and read the runout using a dial i n di-
cator.
Actual runout is 1/2 the total i n dicator reading.
SERVICE LIMITS: Radial: 2.0 mm (0.08 in)
Axial: 2.0 mm (0.08 in)
13-3