Honda Shadow TA200 2001 Manual page 51

MAINTENANCE
ENGINEOLCENTRRJGAI..RLTER
Remove the right crankcase cover (page 9-3).
Remove the screws and the oil filter rotor cover.
Clean the i n side of the oil filter rotor
using a clean lint-free cloth.
CAUTION:
Do not allow dust or dirt lo enter the crankshaft oil passage.
Do not use compressed air to clean the filter rotor.
Remove the B-crip and oil throgh and spring tram the oil fil·
ter cover.
Compressed air to clean the oil throgh.
Clean the oil filter cover.
Install the spring, oil throgh and B-crip.
OIL THROGH
\,
®
I
SPRING
OIL THROGH
?
- v ,
B-CRIP
B-CRIP
Install the oil filter rotor cover wilh a new gasket, aliging the
screw holes in the cover and gasket.
Install and tighten the screw to the specified torque.
TORQUE: 3 N-m (0.3 kgf.m, 2.2 lbf-ft)
Install the right crankcase cover (page 9-15).
3-12
SPRING