Table of Contents
Advertisement
CYLINDER HEAD/VALVES
CYUNDERtEADCO\IERICAMSHAFT
FB()VAI..
Remove the engine (page 6-4).
Remove the bolts and cam sprocket cover and gasket.
Remove the starter (page 17-4).
Remove the bolts, cam chain tensioner l i fter and gasket.
BOLTS
CAUTION:
Do not rotate the crankshaft clockwise to prevent the func-
tioning of the one-way decompressor system.
Remove the timing hole cap and crankshaft hole cap (page 3-
8).
Rotate the crankshaft counterclockwise to align the "T" mark
and i n dex l i ne on the flywheel with the i n dex notch of the
timing hole in the crankcase cover.
If the piston is not at T. D .C. on the commpression stroke, rotate
the crankshaft 360 degrees countercrockwise and recheck.
NOTE:
Be careful not to let the sprocket bolts fall i n to the crankcase.
T
INDEX NOTCH
"T" MARK
I N DEX LINE
Remove the cam sprocket bolts.
7-4
Advertisement
Chapters
Table of Contents
