Honda Shadow TA200 2001 Manual page 219

TORQUE VALUES
Front caliper bracket bolt
Front caliper pad pin plug
Front caliper bleed valve
Front caliper pad pin
Front caliper bracket pin
Front caliper torque nut
Front reservoir cover screw
Brake lever pivot bolt
Brake l e ver pivot nut
Front brake light switch screw
Rear reservoir cover screw
Rear master cylinder hose joint screw
Rear master cylinder l o wer joint nut
Rear caliper pad pin plug
Rear caliper bleed valve
Rear caliper bracket bolt
Rear caliper pad pin
Rear caliper bracket pin
Rear caliper torque nut
Brake hose oil bolt
TOOLS
Snap ring pliers
30 N-m (3.1 kgf-m, 22 lbf-ft)
3 N-m (0.3 kgf-m, 2.2 lbf.ft)
6 N-m (0.6 kgf-m, 4.3 lbf-ft)
18 N-m (1.8 kql-m, 13 lbf.ft)
18 N-m (1.8 kgf-m, 13 lbt-ft)
23 N-m (2.3 kgf-m, 17 lbf-ft)
2 N-m (0.2 kgf-m, 1.4 lbf-ft)
6 N-m (0.6 kgf-m, 4.3 lbf-ft)
6 N-m (0.6 kgt-m, 4.3 lbf.ft)
1 N-m (0.1 kgf-m, 0.7 lbf-ft)
2 N-m (0.2 kql-m, 1.4 lbf.ft)
2 N-m (0.2 kgf-m, 1.4 lbt-ft)
18 N-m (1.8 kql-m, 13 lbf.ft)
3 N-m (0.3 kgf-m, 2.2 lbf-ft)
6 N-m (0.6 kgf-m, 4.3 lbt-ft)
26 N-m (2.7 kgf-m, 20 lbf-ft)
18 N-m (1.8 kgf-m, 13 lbf-ft)
18 N-m (1.8 kqt-m, 13 lbf.ft)
23 N-m (2.3 kgf-m, 17 lbf-ft)
34 N-m (3.5 kql-m, 25 lbf.ft)
07914 - SA50001
HYDRAULIC BRAKE
Apply a locking agent to the threads.
Apply a locking agent to the threads.
ALOC bolt replace with a new one.
Apply a locking agent to the threads.
BRAKE LEVER/PEDAL SOFT OR SPONGY
Air i n the hydraulic system
Leaking hydraulic system
Contaminated brake disc/pad
Worn caliper piston seal
Worn master cylinder piston cup
Worn brake pad/disc
Contaminated caliper
Caliper not sliding properly
Worn brake pad/disc
Low fluid level
Clogged fluid passage
Warped/deformed brake disc
Sticking/worn caliper piston
Sticking/worn master cylinder piston
Contaminated master cylinder
Bent brake lever/pedal
BRAKE LEVER/PEDAL HARD
Sticking/worn caliper piston
Caliper not sliding properly
Clogged/restricted fluid passage
Worn caliper piston seal
Sticking/worn master cylinder piston
Bent brake l e ver/pedal
BRAKE DRAGS
Contaminated brake disc/pad
Warped/deformed brake disc
Caliper not sliding properly
Misaligned wheel
14-3