Honda Shadow TA200 2001 Manual page 84

Install the throttle stop control knob.
Install the fuel tube.
CARBlJE"ORINSTAI I ATION
Connect the carburetor body to the insulator and connecting
tube.
Install the throttle cable to the throttle drum.
Install the adjusters to the stay.
Connect the air cut-off valve, air vent lube and drain tube.
Tighten the insurator band screw and connecting tube band
screw.
Connect the fuel tube, N0.5 and N0.11 tube and fuel tube.
Adjust the throttle grip free play (page 3-5)
Install the following:
- fuel tank (page 2-5).
STARTING ENRICHMENT (SE) VALVE
Remove the carburetor (page 5- 7)
Loosen the valve nut and remove the starting enrichment (SE)
valve.
Check the starting enrichment (SE) valve for scoring, scratches
or wear.
Check the seat at the tip of the SE valve for stepped wear.
Replace the SE valve set i f necessary.
Installation i s reverse order of removal.
After the installation, check for the smooth operation of the
SE valve knob (page 3-6).
FUEL SYSTEM
THROTILE STOP
CONTROL KNOB
_ STARTING ENRICHMENT (SE) VALVE
5-15