Honda Shadow TA200 2001 Manual page 94

ENGINE REMOVAL/INSTALLATION
Remove the drive sprocket setting plate bolts.
Align the driver sprockt setting plate and loolh countershall
tooth, then remove the setting plate and drive sprocket.
REMOVAL
NOTE:
Refer
to
page 6-1 for the parts which must be removed before
removing the engine.
Remove the gearshift arm pinch bolt and gearshift arm.
Place a jack or other adjustable support under the engine.
NOTE:
The jack height must be continually adjusted to relieve stress
for ease bolt removal.
disconnect the air supply hose.
Remove the bolts, air supply pipe and 0-ring from the cylin-
der head.
6-4
PINCH BOLT