Honda Shadow TA200 2001 Manual page 231

Install the brake light switch to the master cylinder aligning
the brake l i ght switch boss and master cylinder hole.
Install and tighten the screw to the specified torque.
TORQUE: 1 N-m (1 kgf.m, 0.7 lbf-11)
HYDRAULIC BRAKE
SWITCH
SCREW
Install the brake lever to the master cylinder.
Apply cilicon grease to the brake lever pivot bolt.
Install and tighten the brake l e ver pivot bolt and nut to the
specified torque.
TORQUE:
Pivot bolt: 6 N-m (0.6 kgf,m, 4.3 lbf-tt)
Pivot nut: 6 N-m (0.6
kgf.m,
4.3 lbf.ft)
LEVER
\
BOLT
NUT
INSTALLATION
MASTER CYLINDER
HOLDER
Install the master cylinder and the master cylinder holder with
the "UP" mark facing up.
Align the end of master cylinder with the punch mark on the
handlebar.
Install the fronl master cylinder bolts and tighten lhe upper
bolt first, then tighten the l o wer bolt securely.
ALIGN
"UP" MARK
14-15