Honda Shadow TA200 2001 Manual page 226

HYDRAULIC BRAKE
Clean the i n side of the caliper especially around the caliper
piston.
Make sure lhat the pad springs is installed i n position.
Install new pads so that their ends rest on the pad retainer on
the bracket properly.
Install the pad pins by pushing the pads against the pad spring
to align the pad pin holes in the pads and caliper.
Install the rear caliper.
Install and lighten the new rear caliper holder bolls to the
specified torque.
TORQUE: 26 N·m (2.7 kgf-m, 20 lbf.ft)
14-10
r