Headlight - Honda Shadow TA200 2001 Manual

BULBFER.ACEMB'IT
HEADLIGHT
1· 1 1¥i;frllt
1
iN
A halogen headlight bulb becomes very hot while the head·
light is
ON, and remain hot for a while after
it
is turned OFF.
Be sure to let It cool down before servicing.
Remove the two screws, collars and headlight.
Disconnect the headlight 3P connector.
Remove the dust cover.
Remove the headlight bulb socket by turning i t counter-clock·
wise.
Remove the headlight bulb.
CAUTION:
A void touching halogen headlight bulb. Finger prints can cre-
ate hot spats that cause a bulb to break.
If you touch the bulb with your bare hands, clean it with
cloth moistened with denatured alcohol to prevent early
bulb failure.
Rplace a new headlight bulb.
install and align the boss off the bulb and slit of the head light
unit.
Installation i t in the reverse order of removal.
3P CONNECTOR
HEADLIGHT BULB
SOCKET
ALIGN
LIGHTS/METER/SWITCHES
BOLTS/COLLARS
DUSTCOVER
HEADLIGHT
BULB
Connect the headlight 3P connecter.
Install the headlight to the headlight case.
Install the two screws, collars and headlight.
Adjust the headlight AIM (page 3-19).
3P CONNECTOR
BOLTS/COLLARS
18-3