HYDRAULIC BRAKE
Install new pads so that their ends rest on the pad retainer on
the bracket properly.
lnslall lhe pad pins by pushing the pads against the pad spring
to align the pad pin holes in the pads and caliper.
Install the front brake caliper to the front fork.
Clean and apply a l o cking agent to the front caliper bracket
bolt threads.
Install and tighten the front caliper bracket bolts to the speci-
fied torque.
TORQUE: 30 N-m (3.1 kgf-m, 22 lbf·ft)
CALIPER
Tiqhten the pad pins to the specified torque.
TORQUE: 18 N-m (1.8 kgf-m, 13 lbf·ft)
Install and tighten the pad pin plugs to the specified torque.
TORQUE: 3 N-m (0.3 kgf-m, 2.2 lbf·ft)
After replacement, operate the brake lever to seat the cali-
per pistons against the pads.
14-8
PAD PINS
PAD PIN PLUGS