Honda Shadow TA200 2001 Manual page 235

NOTE:
Replace the dust seals and piston seals with a new ones.
Replace the caliper and bracket pin boots i f i t i s wear, dete-
rioration or damage.
Apply silicone grease to the boot i n ner surface.
Be sure that each part i s free from the dust or dirt before
reassembly.
Coat new piston seals with clean brake fluid and install them
in the seal grooves i n the caliper.
Coat new dust seals with silicone grease and i n stall them in
the seal grooves in the caliper.
Coat the caliper piston with clean brake fluid and install i t
into the caliper cylinder with the opening toward the pads.
Replace the bracket pin boots with a new ones if it is wear,
deterioration or damage.
Apply silicon grease i n to the boots.
Install the bracket pin boots to the caliper body.
Apply silicone grease to the bracket pins.
Install the caliper bracket aver the caliper.
Install the pad spring to the caliper body.
CALIPER
BOOTS
HYDRAULIC BRAKE
PISTON
BRACKET PINS
BRACKET
CALIPER
14-19