Honda Shadow TA200 2001 Manual page 132

9.Q.UTOfGEARSHFTL.NKAGE
SERVICE INFORMATION
TROUBLESHOOTING
RIGHT CRANKCASE COVER
REMOVAL
CLUTCH
9-1
9-2
9-3
9-5
PRIMARY DRIVE GEAR
GEARSHIFT LINKAGE
RIGHT CRANKCASE COVER
INSTALLATION
9-12
9-12
9-14
SERVICEtFORMAllON
GENERAL
This section covers service of the clutch and gearshift l i nkage. All service can be done with the engine installed i n the
frame.
Transmission oil viscosity and level have an effect on clutch disengagement. When the clutch does not disengage or the
motorcycle creeps with clutch disengaged, i n spect the transmission oil level before servicing the clutch system.
Unit: mm (in)
E
SPECIFICATIONS
ITEM STANDARD SERVICE LIMIT
Clutch Spring free l e ngth 37.9 (1.49) 34.7 (1.37)
Disc thickness
A
2.92 - 3.08 (0.115 - 0.121)
2.6 (0.10)
B
3.62-3.70 (0.143 -0.146) 3.3 (0.13)
Plate warpage
--
0.10 (0.004)
Outer guide
O.D.
27.959- 27.980 (1.1007-1.1016) 27.93 (1.099)
1.0.
19.983 - 19.996 (0.7867 - 0.7872) 20.02 (0.788)
Outer 1.0.
28.000- 28.013 (1.1024 -1.1029) 28.04 (1.1039)
Mainshaft 0.0 at clutch outer guide
19.967-19.980 (0.7861-0.7866) 19.95 (0.7854)
TORQUE VALUES
Clutch l i fter plate bolt
Clutch center l o ck nut
Shift drum stopper arm bolt
Oil filter rotor lock nut
12 N·m (1.2 kgf·m, 9 l b f-ft)
83 N·m (8.5 kgf·m, 61 lbf·ft)
12 N·m (1.2 kgf·m, 9 l b f-ft)
83 N·m (8.5 kgf·m, 61 lbMt)
9-1