Honda Shadow TA200 2001 Manual page 255

REGULATOR/RECTIFIER
SYSTEM INSPECTION
Remove the front right side cover (pa. g e 2- 3) .
Rarove the regulator/rectifier 5P connector, and
check it
for
loose co rt.act; or corroded t.ermn ial s .
If the regulated voltage readiuq
(page
15-7) is cut of the speer-
f
i.cat a on, measure the voltage between connector tenninals
{wire haniess side)
as
tolla,..Ts:
Item Terminal
Sp:cification
Battery che'rqi.r 1g Red
(+)
and Battery voltage
lire
ground (-)
shruld register
Charqanq coil
Yello\v and Yellow
0.1-1.oy
rue
-
,
"" (at 20"C/68°F)
Ground line Ground
ccrrt irxrit.y
should exist
If all components of the charging system are normal and
there are no loose connections at the regulator/rectifier ccn-
nector-s, replace the requlatox/rect.i.r'Ier
unit.
REGULATOR/
RECTIFIER SP
CONNECTOR
REGULATOR/RECTIFIER
REMOVAL/INSTALLATION
CONNECTOR
BOLTS
Remove the regulator/rectifier unit mounting bol.t s .
Disconnect the connector and remove the regulator/rectifier
uri.t.
Install the regulator/rectifier unit in the reverse order of re-
moval.
REGULATOR/RECTIFIER
15-8